Do you have some boards that are too rugged or rough? Are you going to throw it away because you don’t know how to transform it? Don’t throw it away. Because you can improve its shape to be more beautiful. How? Very simple, use the best wood planer.
Wood planers are an indispensable tool for craftsmen in furniture manufacturing. Use a wood planer to turn rough grain into even flatter and more attractive boards. You can see it is applied to flatten tables, seats or edges.
Therefore, do not rush to throw away the ugly boards. I am sure that you can convert them into many beautiful furniture.
Therefore, How to flatten wood panels with a wood planer? In this article, I will guide you step by step in detail for you. Let’s get started.
Step 1: Reclassify the wood
As you know, wood is the most moisture-affected material. Therefore, before you want to flatten the surface of the wood, you have to check and classify the panels. Sturdy boards that are certainly usable and those that are cracked or brittle due to termites cannot be applied anymore.
After classification, use a hand saw or a table saw to cut through any excess or dirty wood on the surface and edges of the board.
Step 2: Create a wooden box like a pushing board
A simple box like this is guaranteed to be perfectly flat and free from flexing or crimping. To create a compact, lightweight box to attach the planks for easier and more convenient planing.
Here, I will show how to make a wooden box:
Using a table saw, I cut two plywood panels that are 60cm long, 40cm wide and about 5 cm thick (depending on the size of the board you want to plan). Then, use specialized glue to attach the wooden panels. To complete the box, I sprayed it with a few layers of lacquer, followed by a gentle rub with sandpaper. You have created a lightweight, flat box. The method to make it is simple, right?
Note: If you can’t or you find that it takes too long to make this box. You can use aboard as well. However, make sure it is firm, flat and smooth.
Step 3: Flatten the board
The wooden board that you require to flatten will be placed on the box and made as level as possible using shims for full support. Use a strip of tape between the contact plane between the box and the board to prevent the panel from damaging, skimming or destroying the box while operating to planing. Start shaving from the small boards first. Then came thicker and longer wooden boards. Use a wooden push stick to save effort and safety for you.
Step 4: Use hot glue to stick the board down
To make the board guarded and securely in place by using hot glue. You don’t have to worry about the board while you plan it can move and fall out. Please also be assured. Glue holds the board firmly while you plan, but it’s easy to remove once the top surface has been planed.
Step 5: Plan the top of the board
The top surface of the board is now planed using the best thickness planer. You should plan little by little. This is particularly important because although the middle part of the board is not wobbly, there may still be any pressure from the cutter head that can cause the board to bend. As a result, the board is loose and uneven.
Step 6: Remove the glue
The hot glue can be removed with the help of the best wood chisels. You can pull the glue off the surface to be glued, or simply remove the tape and the glue will come with it.
Step 7: Plan the other side of the board
Now, put the new plane down and the other plane. Continue to plan as above
Step 8: Complete
After planing all the edges of the wood. You have a nice and smooth wooden panel. Let’s think about what to do with it.
I have completed the steps for planing the board to become flat. Hopefully, it was helpful to you, And thank you for taking the time to read.